Press-brake tooling lined up on the machine

Press-Brake Bending

Straight lines, honest angles.

Every thickness from 1 mm to 20 mm, up to 6 metres long — five CNC press brakes, the same angle every single stroke.

1–20 mmthickness range

Press-brake bending

Every thickness.
1 to 20 millimetres.

Thin-gauge panels or 20 mm plate — if it's on your drawing, one of our five CNC brakes bends it. Up to 6 metres long, to the degree, and the last part of the run matches the first.

The machines on our floor

19 m of bed, combined

  1. 01BaykalCNC press brake3 mbed
  2. 02DurmaCNC press brake3 mbed
  3. 03ErmaksanCNC press brake3 mbed
  4. 04JUGAOCNC press brake4 mbed
  5. 05JUGAOCNC press brake6 mbed
±1°angle accuracy — programmed, not eyeballed, on every machine.
1–20 mm thicknessUp to 6 m longGooseneck tooling · 20 × 50 mm U-bendsChecked before dispatch

Gooseneck tooling

The U-bend a straight punch can't finish.

The second bend of a deep channel runs on the 12 mm V — and as it closes, the first flange swings up with the web, straight into the body of a straight punch. Our gooseneck's carved throat gives that flange somewhere to swing, so U-channels down to 20 × 50 mm close in one clean hit.

Drawn from our actual tooling →

1 · STRAIGHT PUNCH — BLOCKED2 · GOOSENECK — CLEARS & FINISHES12 mm V✕THE FIRST FLANGE LIFTSSTRAIGHT INTO THE PUNCH205090°20 × 50 mmU-CHANNELONE CLEAN HIT

150 × 150 four-way die · 12 mm V · tools to scale

CNC press brake forming sheet under the work light
Five CNC brakes on the floor — your job doesn't wait for a machine.
Operator handling sheet metal at the press brake
Skilled hands on every part — supported, never scratched.

Fits on site

An angle that matches the drawing means your assembly bolts together first time — no grinding, no persuading, no site rework.

The whole batch matches

CNC-controlled strokes make part three hundred identical to part one. Grab any two from the stack — they're twins.

No hand-offs

Bent parts walk straight to welding and coating under the same roof. One order, one schedule, one place to call.

Press-Brake Bending

CNC bending, repeatable to the degree.

Every thickness from 1 mm to 20 mm, up to 6 metres long, bent to the degree on five CNC press brakes — with gooseneck tooling for 20 × 50 mm U-bends, and the last part of the run matching the first.

We work with

Mild steelStainless steelAluminium
1–20 mm
Thickness range
5
CNC press brakes
6 m
Max bend length
  1. 1Send your drawing / DXF
  2. 2We confirm price & lead time
  3. 3Bent on CNC brakes
  4. 4Angles checked
  5. 5Delivered ready to use

Ready to form

1 to 20 mm. Send the drawing.

Tell us material, thickness and angle — we'll confirm price and lead time, and bend it to the degree on any of our five machines.

Message us on WhatsApp

Next capability

Welding

Get a quote